CONSTRUCTION Horizontal cylindrical, 2:1 semi ellipsoidal ends

DESIGN CODE PD5500 / ASME V III

CAPACITY RANGE 0.3 to 200 cubic metres.

DESIGN PRESSURE As per Client requirements.

DESIGN S.G. As per Client requirements.

DESIGN TEMPERATURE As per Client requirements.

STRESS RELIEF If required by code or Client.

CORROSION ALLOWANCE As per Client requirements.

STEEL GRADES A240 TP 316L & 304L

TESTING Hydrostatic test to code included.NDT to code.

SADDLES 2 to 5 off as required- Fully welded.

FITTINGS As per Client requirements.

FINISH-Internal Self Colour

FINISH-External As per Client requirements.

NAMEPLATE Stainless Steel , engraved

THIRD PARTY INSPECTION By Client or Integ

PED (Pressure Equipment Directive) If for European use, and if the working pressure is above 0.5barg, then PED regulations apply.

THIRD PARTY DESIGN APPRAISAL, SURVEILLANCE & INSPECTION

All pressure vessels manufactured to PD5500 and ASME Vlll codes must be inspected by competent Independent Insurance Authority. Order for this work is normally placed by Buyer, but Hartwell can arrange Inspection for code compliance

DESIGN CODE

The listed vessels are designed to PD5500 Category 2, which for most applications provides the most economic vessel scantlings. For a given design, Category 1 vessels are of exactly the same thickness material but the welds are subject to 100% NDT.

Category 3 vessels are only subject to visual inspection of welds and whilst some small vessels can be economically viable, this category generally results in thicker vessels due to the restricted design stress. Vessels designed to ASME Vlll can vary in thickness (+/-) when compared to the equivalent PD5500 vessel.

Hartwell vessel engineers with many years of design experience and aided by the latest computer software can guide clients to achieve the optimum design code/category for a particular application.

UNDERGROUND TANKS – SINGLE ‘SKIN’ CONSTRUCTION

A COMPLEMENTING RANGE OF UNDERGROUND TANKS (2 – 90 CUBIC METRES) IS AVAILABLE WHERE EXTRA INTEGRITY AND SPILL PROTECTION WITH INBUILT LEAK DETECTION IS ESSENTIAL.

Specification – Standard Tanks.

CONSTRUCTION Horizontal cylindrical with dished ends

DESIGN CODE EN12285-2

CAPACITY RANGE 2300-136300 Litres

STEEL GRADES A240 316L & 304L Stainless Steel

COMPARTMENTS Single, double, triple or multi-compartment

TESTING As per design code.

STANDARD FITTINGS (Guide Only)

• 1-600 dia raised manhole with bolted cover & gasket
• 2-50 NB sockets for fill and vent
• 2- 40 NB sockets for outlet and drain
• 2- Lifting lugs

FINISH– Internal / Clean-Self Colour

FINISH– External / Clean-Self Colour